Après 15 années d’existence, le forum historique de Framasoft, ferme ses portes. Pour les nostalgiques et les curieux, il reste toujours possible de consulter les discussions mais c’est maintenant le forum Framacolibri qui prend la relève. Si vous avez des questions, on se retrouve là-bas… ;)

ForumsDiscussions

 » Les logiciels libres » GNU/Linux - La migration

Les logiciels libres
La philosophie du libre
Autour du réseau Framasoft

Nous sommes le Jeu 11 Sep, 2025 20:47
Supprimer les cookies

Page 1 sur 61, 2, 3, 4, 5, 6 SuivantATI et DRIVER

Perdu dans la migration ? Demandez votre chemin, on peut peut-être vous aider.

Mar 13 Déc, 2005 13:16

Salut.
Je viens d'installer une KLA, j'ai une carte ati radeon. L'affichage fonctionne mais:
- Je n'ai pas de sortie TV
- Je n'arrive pas à lire (correctement) certain fichiers comme mpeg2
- L'economiseur d'ecran fonctionne mais pas la mise en veille du moniteur.
Je pensais resoudre ces problemes en installant le driver proprietaire de chez ati.
Je lance donc l'installation kpackage (pardon pour les puristes) après avoir verifier la version de mon xfree. Voila que pendant l'installation on me demande le serveur x par defaut. J'ai un choix de 1 à 15 avec divers serveurs je choisis donc le 14 qui correspond à xfree. Mais la question revient une deuxieme fois avec un choix en moins celui du xfree. ????
Est-ce normal? Faut il pour le deuxieme choix indiquer un autre serveur pour la sortie tele? Si oui lequel? Sinon que puis-je faire?

Merci.
CAPUCINE

Messages : 41

Mar 13 Déc, 2005 14:04

Bijour,

Où as-tu récupéré le pilote ATI ? Quelle version d'X/Xorg utilises-tu ?

Pour la sortie TV, soit tu peux utiliser l'utilitaire ATI (mais je sais pas comment ça marche ;) ), soit tu édites le fichier de configuration à la main (ce que je préconise, mais bon). Après il faut aussi savoir ce que tu veux : mode clone ou extension du bureau (écran ordinateur = écran TV donc au mieux 800x600, ou écran d'ordi s'étendant sur l'écran TV) ?

Pour le mpeg2 je suis pas sûr que cela vienne du pilote vidéo, mais plutôt du codec : quel logiciel utilises-tu ?

Pour la mise en veille, perso j'éteins mon écran ... comme ça je consomme vraiment rien ;)

Usti

PS: le serveur X/Xorg propriétaire est le fglrx, mais un pilote du noyau doit être au préalable chargé.
Nikoniste, Andesiste, Debianiste, ex-ATIste et Wi-Fiste en WPA avec un RaLink 2500 ;)
http://andesi.org/
ustilago

Messages : 211
Géo : Charente-Maritime

Mar 13 Déc, 2005 14:30

Je n'ai pas recuperé le pilote ati c'est kpackage qui le trouve dans ses sources.
Ma version d'Xfree c'est la 4.3.
J'ai vu passer une config en editant le fichier mais elle datait de 2003 et je trouve que l'affichage peine trop et je voudrais voir si cela va mieux avec le driver ati.
Pour la sotie tele je n'ai aucun utilitaire ati (je pense le trouver avec le driver), j'ai besoin d'un 1280/1024 pour le moniteur et pour la tele je ne sais pas mais un 800/600 devrais faire l'affaire.
Pour le mpeg2 je crois que c'est xim ou xmms.
Et pour la mise en veille j'ai l'utilitaire de confiquration graphique mais il n'a aucun effet. Je peux aussi couper le compteur, mais je prefererais que l'ecran de veille fonctionne normalement (meme sous win ca marche...).
Merci
CAPUCINE

Messages : 41

Mar 13 Déc, 2005 15:45

CAPUCINE a écrit:Je n'ai pas recuperé le pilote ati c'est kpackage qui le trouve dans ses sources.

Voilà typiquement pourquoi je n'aime pas les clickodromes ... au bout du compte on ne sait pas ce qu'on fait ;)

Est-ce que le module ATI du noyau est bien chargé ?
Code: Tout sélectionner
$ lsmod


Si c'est pas le cas, tu n'iras pas loin.

Où kpackage récupère-t-il le pilote ATI ? A ma connaissance ATI ne fournit qu'un .rpm, d'où ma question de savoir d'où provient le pilote installé.

Sinon donne le contenu de ton /etc/X11/XF86Config-4, ça peut aider, ainsi que le fichier de log d'X (/var/log/XFree86.0.log ou approchant).

Ah oui, et à tout hasard le résultat d'un
Code: Tout sélectionner
$ lspci
pour qu'on sache exactement le matériel incriminé ;)

Usti
Nikoniste, Andesiste, Debianiste, ex-ATIste et Wi-Fiste en WPA avec un RaLink 2500 ;)
http://andesi.org/
ustilago

Messages : 211
Géo : Charente-Maritime

Mar 13 Déc, 2005 19:48

Module Size Used by
lp 13704 0
ns558 8580 0
8250_pnp 12160 0
i2c_viapro 10512 0
i2c_core 20992 1 i2c_viapro
ehci_hcd 32136 0
snd_emu10k1_synth 9728 0
snd_emux_synth 35328 1 snd_emu10k1_synth
snd_seq_virmidi 9728 1 snd_emux_synth
snd_seq_midi_emul 10112 1 snd_emux_synth
snd_seq_midi 10272 0
snd_seq_midi_event 10112 2 snd_seq_virmidi,snd_seq_midi
snd_seq 48656 5 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_midi,snd_seq_midi_event
snd_emu10k1 97412 1 snd_emu10k1_synth
snd_rawmidi 23072 3 snd_seq_virmidi,snd_seq_midi,snd_emu10k1
snd_seq_device 10636 6 snd_emu10k1_synth,snd_emux_synth,snd_seq_midi,snd_seq,snd_emu10k1,snd_rawmidi
snd_ac97_codec 72312 1 snd_emu10k1
snd_util_mem 7296 2 snd_emux_synth,snd_emu10k1
snd_hwdep 10784 2 snd_emux_synth,snd_emu10k1
pci_hotplug 27972 0
snd_pcm_oss 47264 0
snd_pcm 77316 3 snd_emu10k1,snd_ac97_codec,snd_pcm_oss
snd_timer 23556 3 snd_seq,snd_emu10k1,snd_pcm
snd_page_alloc 11268 2 snd_emu10k1,snd_pcm
snd_mixer_oss 18304 1 snd_pcm_oss
snd 46820 12 snd_emux_synth,snd_seq_virmidi,snd_seq,snd_emu10k1,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_hwdep,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
md5 7680 1
ipv6 238016 8
sis_agp 9988 0
intel_agp 22300 0
efficeon_agp 10144 0
amd_k7_agp 10380 0
ali_agp 9216 0
autofs4 19076 1
af_packet 24328 0
ntfs 163600 0
emu10k1 71556 0
sound 71684 1 emu10k1
soundcore 11104 3 snd,emu10k1,sound
ac97_codec 20236 1 emu10k1
via_rhine 23172 0
mii 8320 1 via_rhine
via_agp 11392 1
agpgart 31440 6 sis_agp,intel_agp,efficeon_agp,amd_k7_agp,ali_agp,via_agp
emu10k1_gp 6656 0
gameport 15496 4 ns558,emu10k1_gp
via_ircc 21908 0
irda 118200 1 via_ircc
crc_ccitt 5888 1 irda
parport_pc 38724 1
parport 33480 2 lp,parport_pc
pcmcia 23696 0
yenta_socket 22152 0
rsrc_nonstatic 14080 1 yenta_socket
pcmcia_core 43268 3 pcmcia,yenta_socket,rsrc_nonstatic
video 18308 0
thermal 14984 0
processor 24520 1 thermal
fan 7300 0
container 7296 0
button 9104 0
tsdev 9664 0
evdev 11008 0
battery 12420 0
ac 7556 0
eth1394 21000 0
genrtc 12060 0
usbhid 42464 0
unionfs 68088 0
usblp 14464 0
sbp2 24584 0
ohci1394 33460 0
ieee1394 297432 3 eth1394,sbp2,ohci1394
usb_storage 68544 0
ohci_hcd 21764 0
uhci_hcd 31632 0
usbcore 102492 7 ehci_hcd,usbhid,usblp,usb_storage,ohci_hcd,uhci_hcd
8250 42844 1 8250_pnp
serial_core 21120 1 8250
ext3 123912 1
jbd 65572 1 ext3






Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
# PS/2 Mouse using /dev/input/mice in Kernel 2.6
# Serial Mouse not detected
InputDevice "USB Mouse" "CorePointer"
EndSection

Section "ServerFlags"
Option "AllowMouseOpenFail" "true"

EndSection

Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
# FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/CID"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/TrueType"
EndSection

Section "Module"
Load "ddc" # ddc probing of monitor
Load "GLcore"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "speedo"
Load "type1"
Load "freetype"
Load "record"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"

EndSection

Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection

Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection

Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection

# Auto-generated by KNOPPIX mkxf86config

Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
VendorName "GSM"
ModelName "GSM4a90"
HorizSync 30 - 83 # DDC-probed
VertRefresh 56 - 75 # DDC-probed
# These are the DDC-probed settings reported by your monitor.
# 1024x768, 75.0Hz; hfreq=60.02, vfreq=75.03
ModeLine "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768, 75.0Hz; hfreq=60.02, vfreq=75.03
ModeLine "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768, 70.0Hz; hfreq=56.48, vfreq=70.07
ModeLine "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 800x600, 75.0Hz; hfreq=46.88, vfreq=75.00
ModeLine "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600, 75.0Hz; hfreq=46.88, vfreq=75.00
ModeLine "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600, 72.0Hz; hfreq=48.08, vfreq=72.19
ModeLine "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
# 800x600, 60.0Hz; hfreq=37.88, vfreq=60.32
ModeLine "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
# 640x480, 75.0Hz; hfreq=37.50, vfreq=75.00
ModeLine "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480, 75.0Hz; hfreq=37.50, vfreq=75.00
ModeLine "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480, 60.0Hz; hfreq=31.47, vfreq=59.94
ModeLine "640x480" 25.17 640 648 744 784 480 482 484 509 -hsync -vsync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
# 1920x1200 @ 60.00 Hz (GTF) hsync: 74.52; pclk: 193.16 MHz
Modeline "1920x1200" 193.16 1920 2048 2256 2592 1200 1201 1204 1242 -HSync +HSync
EndSection

Section "Device"
### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
#Option "sw_cursor"
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
Identifier "Card0"
# ***spam*** line is auto-generated by KNOPPIX mkxf86config
Driver "fbdev"
VendorName "All"
BoardName "All"
# BusID "PCI:1:0:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
# DefaultColorDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Mode 0666
EndSection

XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-14sarge1 20050901212727 fjp@localhost.localdomain)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.8-16.0508-2 i686 [ELF]
Build Date: 02 September 2005

This version of XFree86 has been extensively modified by the Debian
Project, and is not supported by the XFree86 Project, Inc., in any
way. Bugs should be reported to the Debian Bug Tracking System; see
<URL: http://www.debian.org/Bugs/Reporting >.

We strongly encourage the use of the "reportbug" package and command
to ensure that bug reports contain as much useful information as
possible.

Before filing a bug report, you may want to consult the Debian X FAQ:
XHTML version: file:///usr/share/doc/xfree86-common/FAQ.xhtml
plain text version: file:///usr/share/doc/xfree86-common/FAQ.gz

Module Loader present
OS Kernel: Linux version 2.6.12 (root@Knoppix) (gcc-Version 3.3.6 (Debian 1:3.3.6-7)) #2 SMP Tue Aug 9 23:20:52 CEST 2005
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Dec 12 14:51:10 2005
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "fr"
(**) XKB: layout: "fr"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "USB Mouse"
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/truetype".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/truetype").
(WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/defoma/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/defoma/TrueType" does not exist.
Entry deleted from font path.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/PEX,/usr/X11R6/lib/X11/fonts/cyrillic,/usr/X11R6/lib/X11/fonts/Type1,/usr/share/fonts/ttf/western,/usr/share/fonts/ttf/decoratives,/usr/share/fonts/truetype/openoffice,/usr/share/fonts/truetype/ttf-bitstream-vera"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "AllowMouseOpenFail" "true"
(++) using VT number 7

(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80008950, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3189 card 1043,807f rev 80 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b198 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0a:0: chip 127a,1025 card 127a,1025 rev 01 class 07,80,00 hdr 00
(II) PCI: 00:0b:0: chip 1102,0002 card 1102,8027 rev 08 class 04,01,00 hdr 80
(II) PCI: 00:0b:1: chip 1102,7002 card 1102,0020 rev 08 class 09,80,00 hdr 80
(II) PCI: 00:0e:0: chip 1106,3044 card 1106,e8e9 rev 46 class 0c,00,10 hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1043,80a1 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1043,80a1 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1043,80a1 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3104 card 1043,80a1 rev 82 class 0c,03,20 hdr 00
(II) PCI: 00:11:0: chip 1106,3177 card 1043,80a1 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1043,80a1 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:12:0: chip 1106,3065 card 1043,80a1 rev 74 class 02,00,00 hdr 00
(II) PCI: 00:13:0: chip 1045,c861 card 1045,c861 rev 10 class 0c,03,10 hdr 00
(II) PCI: 01:00:0: chip 1002,5964 card 12ab,5964 rev 01 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,5d44 card 12ab,5965 rev 01 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xd7000000 - 0xd7ffffff (0x1000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd8000000 - 0xefffffff (0x18000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x5964) rev 1, Mem @ 0xe8000000/27, 0xd7800000/16, I/O @ 0xd800/8, BIOS @ 0xe7fe0000/17
(--) PCI: (1:0:1) ATI Technologies Inc unknown chipset (0x5d44) rev 1, Mem @ 0xd8000000/27, 0xd7000000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xf0000000 from 0xf7ffffff to 0xefffffff
(II) Active PCI resource ranges:
[0] -1 0 0xd4800000 - 0xd4800fff (0x1000) MX[B]
[1] -1 0 0xd5000000 - 0xd50000ff (0x100) MX[B]
[2] -1 0 0xd5800000 - 0xd58000ff (0x100) MX[B]
[3] -1 0 0xd6000000 - 0xd60007ff (0x800) MX[B]
[4] -1 0 0xd6800000 - 0xd680ffff (0x10000) MX[B]
[5] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[6] -1 0 0xd7000000 - 0xd700ffff (0x10000) MX[B](B)
[7] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[8] -1 0 0xe7fe0000 - 0xe7ffffff (0x20000) MX[B](B)
[9] -1 0 0xd7800000 - 0xd780ffff (0x10000) MX[B](B)
[10] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[11] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[12] -1 0 0x00009400 - 0x0000940f (0x10) IX[B]
[13] -1 0 0x00009800 - 0x0000981f (0x20) IX[B]
[14] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B]
[15] -1 0 0x0000a400 - 0x0000a41f (0x20) IX[B]
[16] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[B]
[17] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B]
[18] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[19] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[B]
[20] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd4800000 - 0xd4800fff (0x1000) MX[B]
[1] -1 0 0xd5000000 - 0xd50000ff (0x100) MX[B]
[2] -1 0 0xd5800000 - 0xd58000ff (0x100) MX[B]
[3] -1 0 0xd6000000 - 0xd60007ff (0x800) MX[B]
[4] -1 0 0xd6800000 - 0xd680ffff (0x10000) MX[B]
[5] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[6] -1 0 0xd7000000 - 0xd700ffff (0x10000) MX[B](B)
[7] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[8] -1 0 0xe7fe0000 - 0xe7ffffff (0x20000) MX[B](B)
[9] -1 0 0xd7800000 - 0xd780ffff (0x10000) MX[B](B)
[10] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[11] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[12] -1 0 0x00009400 - 0x0000940f (0x10) IX[B]
[13] -1 0 0x00009800 - 0x0000981f (0x20) IX[B]
[14] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B]
[15] -1 0 0x0000a400 - 0x0000a41f (0x20) IX[B]
[16] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[B]
[17] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B]
[18] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[19] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[B]
[20] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd4800000 - 0xd4800fff (0x1000) MX[B]
[6] -1 0 0xd5000000 - 0xd50000ff (0x100) MX[B]
[7] -1 0 0xd5800000 - 0xd58000ff (0x100) MX[B]
[8] -1 0 0xd6000000 - 0xd60007ff (0x800) MX[B]
[9] -1 0 0xd6800000 - 0xd680ffff (0x10000) MX[B]
[10] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[11] -1 0 0xd7000000 - 0xd700ffff (0x10000) MX[B](B)
[12] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[13] -1 0 0xe7fe0000 - 0xe7ffffff (0x20000) MX[B](B)
[14] -1 0 0xd7800000 - 0xd780ffff (0x10000) MX[B](B)
[15] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[19] -1 0 0x00009400 - 0x0000940f (0x10) IX[B]
[20] -1 0 0x00009800 - 0x0000981f (0x20) IX[B]
[21] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B]
[22] -1 0 0x0000a400 - 0x0000a41f (0x20) IX[B]
[23] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[B]
[24] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B]
[25] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[26] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[B]
[27] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o": No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o": No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o": No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_vertex.o": No symbols found
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "fbdev"
(II) Loading /usr/X11R6/lib/modules/drivers/fbdev_drv.o
(II) Module fbdev: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) FBDEV: driver for framebuffer: fbdev, afb
(II) Primary Device is: PCI 01:00:0
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) Module fbdevhw: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.0.2
ABI class: XFree86 Video Driver, version 0.6
(II) FBDEV(0): using default device
(II) Running in FRAMEBUFFER Mode
(==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
(==) FBDEV(0): RGB weight 565
(==) FBDEV(0): Default visual is TrueColor
(==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) FBDEV(0): hardware: VESA VGA (video memory: 5120kB)
(II) FBDEV(0): checking modes against framebuffer device...
(II) FBDEV(0): mode "1024x768" ok
(II) FBDEV(0): mode "800x600" ok
(II) FBDEV(0): mode "640x480" ok
(II) FBDEV(0): checking modes against monitor...
(--) FBDEV(0): Virtual size is 1280x1024 (pitch 1280)
(**) FBDEV(0): Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) FBDEV(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) FBDEV(0): Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) FBDEV(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) FBDEV(0): Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) FBDEV(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(++) FBDEV(0): DPI set to (72, 72)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(**) FBDEV(0): using shadow framebuffer
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/X11R6/lib/modules/libshadow.a
(II) Module shadow: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(EE) FBDEV(0): FBIOBLANK: Invalid argument
(EE) FBDEV(0): FBIOPAN_DISPLAY: Invalid argument
(==) FBDEV(0): Backing store disabled
(**) Option "dpms" "true"
(**) FBDEV(0): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Keyboard "Keyboard0" handled by legacy driver
(**) Option "Protocol" "IMPS/2"
(**) USB Mouse: Protocol: "IMPS/2"
(**) Option "SendCoreEvents" "true"
(**) USB Mouse: always reports core events
(**) Option "CorePointer"
(**) USB Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Buttons" "5"
(**) USB Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) USB Mouse: ZAxisMapping: buttons 4 and 5
(**) USB Mouse: Buttons: 5
(II) XINPUT: Adding extended input device "USB Mouse" (type: MOUSE)
(II) USB Mouse: ps2EnableDataReporting: succeeded
Warning: font renderer for ".pcf" already registered at priority 0
Warning: font renderer for ".pcf.Z" already registered at priority 0
Warning: font renderer for ".pcf.gz" already registered at priority 0
Warning: font renderer for ".snf" already registered at priority 0
Warning: font renderer for ".snf.Z" already registered at priority 0
Warning: font renderer for ".snf.gz" already registered at priority 0
Warning: font renderer for ".bdf" already registered at priority 0
Warning: font renderer for ".bdf.Z" already registered at priority 0
Warning: font renderer for ".bdf.gz" already registered at priority 0
Warning: font renderer for ".pmf" already registered at priority 0
(EE) FBDEV(0): FBIOBLANK: Invalid argument
SetClientVersion: 0 9
SetClientVersion: 0 9
SetGrabKeysState - disabled
SetGrabKeysState - enabled
SetClientVersion: 0 9
SetGrabKeysState - disabled
(EE) FBDEV(0): FBIOBLANK: Invalid argument
(EE) FBDEV(0): FBIOBLANK: Invalid argument
(EE) FBDEV(0): FBIOBLANK: Invalid argument
(EE) FBDEV(0): FBIOBLANK: Invalid argument
SetGrabKeysState - enabled
SetClientVersion: 0 9
SetGrabKeysState - disabled
(EE) FBDEV(0): FBIOBLANK: Invalid argument
(EE) FBDEV(0): FBIOBLANK: Invalid argument
(EE) FBDEV(0): FBIOBLANK: Invalid argument
(EE) FBDEV(0): FBIOBLANK: Invalid argument
SetGrabKeysState - enabled
(EE) FBDEV(0): FBIOPAN_DISPLAY: Invalid argument
SetClientVersion: 0 9
SetGrabKeysState - disabled
SetGrabKeysState - enabled
(WW) Open APM failed (/dev/apm_bios) (No such device)
(EE) FBDEV(0): FBIOBLANK: Invalid argument
(II) USB Mouse: ps2EnableDataReporting: succeeded
SetClientVersion: 0 9
SetGrabKeysState - disabled
SetGrabKeysState - enabled
SetClientVersion: 0 9
SetGrabKeysState - disabled
SetGrabKeysState - enabled
SetClientVersion: 0 9
SetGrabKeysState - disabled
SetGrabKeysState - enabled
SetClientVersion: 0 9
SetGrabKeysState - disabled
SetGrabKeysState - enabled
SetClientVersion: 0 9
SetGrabKeysState - disabled
SetGrabKeysState - enabled
SetClientVersion: 0 9
SetGrabKeysState - disabled
SetGrabKeysState - enabled
SetClientVersion: 0 9
SetGrabKeysState - disabled
(EE) FBDEV(0): FBIOBLANK: Invalid argument
(EE) FBDEV(0): FBIOBLANK: Invalid argument
SetGrabKeysState - enabled
(EE) FBDEV(0): FBIOBLANK: Invalid argument
(EE) FBDEV(0): FBIOBLANK: Invalid argument
SetClientVersion: 0 9
SetGrabKeysState - disabled
(EE) FBDEV(0): FBIOBLANK: Invalid argument
(EE) FBDEV(0): FBIOBLANK: Invalid argument
SetGrabKeysState - enabled
SetClientVersion: 0 9
SetGrabKeysState - disabled
(EE) FBDEV(0): FBIOBLANK: Invalid argument
(EE) FBDEV(0): FBIOBLANK: Invalid argument
SetGrabKeysState - enabled
SetClientVersion: 0 9
SetGrabKeysState - disabled
(EE) FBDEV(0): FBIOBLANK: Invalid argument
(EE) FBDEV(0): FBIOBLANK: Invalid argument
SetGrabKeysState - enabled
(EE) FBDEV(0): FBIOBLANK: Invalid argument
(EE) FBDEV(0): FBIOBLANK: Invalid argument
(EE) FBDEV(0): FBIOBLANK: Invalid argument
SetClientVersion: 0 9
SetGrabKeysState - disabled
(EE) FBDEV(0): FBIOBLANK: Invalid argument
SetGrabKeysState - enabled
(EE) FBDEV(0): FBIOBLANK: Invalid argument
(EE) FBDEV(0): FBIOBLANK: Invalid argument
(EE) FBDEV(0): FBIOBLANK: Invalid argument
SetClientVersion: 0 9
SetGrabKeysState - disabled
(EE) FBDEV(0): FBIOBLANK: Invalid argument
SetGrabKeysState - enabled
(EE) FBDEV(0): FBIOPAN_DISPLAY: Invalid argument
(EE) FBDEV(0): FBIOPAN_DISPLAY: Invalid argument
(EE) FBDEV(0): FBIOBLANK: Invalid argument
(EE) FBDEV(0): FBIOBLANK: Invalid argument
(EE) FBDEV(0): FBIOBLANK: Invalid argument
SetClientVersion: 0 9
SetGrabKeysState - disabled
(EE) FBDEV(0): FBIOBLANK: Invalid argument
SetGrabKeysState - enabled











0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
0000:00:0a.0 Communication controller: Rockwell International HCF 56k Data/Fax/Voice/Spkp (w/Handset) Modem (rev 01)
0000:00:0b.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 08)
0000:00:0b.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 08)
0000:00:0e.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
0000:00:13.0 USB Controller: OPTi Inc. 82C861 (rev 10)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01)
0000:01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary) (rev 01)

Voila voila...
Je te donnes tout cela en vrac.
Si tu peux m'expliquer...
Merci
CAPUCINE

Messages : 41

Mar 13 Déc, 2005 21:44

AÏE !! :D

Bon, là je suis un peu short en temps, je viens de me battre plus d'une heure pour avoir mon réseau Wi-Fi (sous XP pour le moment ...), je t'explique tout ça demain ;)

Usti
Nikoniste, Andesiste, Debianiste, ex-ATIste et Wi-Fiste en WPA avec un RaLink 2500 ;)
http://andesi.org/
ustilago

Messages : 211
Géo : Charente-Maritime

Mer 14 Déc, 2005 09:24

Bon, j'ai une bonne nouvelle pour toi, tu as une radeon 9200SE, donc pas besoin du pilote prorpiétaire ATI ... apparemment ce jeu de composant est mal reconnu par certains serveurs XFree, mais ça se soigne assez bien ;)

Donc voici les modifications que je te propose dans ton /etc/X11/XF86Config-4 :
Code: Tout sélectionner
Section "Device"
Identifier "Card0"
Driver "radeon"
VendorName "ATI"
BoardName "ATI 9200SE RV280"
ChipId 0x5964
BusID "PCI:1:0:0"
EndSection

Tu spécifies le pilote "radeon" (qui supporte les radeons jusqu'à la 9200), l'emplacement sur le bus PCI, ainsi que le ChipID (c'est apparemment ce qui manque à certains serveurs X pour bien reconnaitre la carte).

Bon, normalement ça devrait marcher, tu relances ton serveur X (genre
Code: Tout sélectionner
/etc/init.d/kdm restart
sous debian et KDE il me semble) et tu vois ce qui se passe ...

Sous X, dans une console, pour vérifier que l'accélération 3D fonctionne tu lances la commande :
Code: Tout sélectionner
$ glxinfo
qui doit te retourner un truc du genre
Code: Tout sélectionner
display: :0.0  screen:0
direct rendering: Yes


Sinon tu colles ton /var/log/XFree86.0.log (si possible entre balises code :? ).

A+

Usti
Nikoniste, Andesiste, Debianiste, ex-ATIste et Wi-Fiste en WPA avec un RaLink 2500 ;)
http://andesi.org/
ustilago

Messages : 211
Géo : Charente-Maritime

Mer 14 Déc, 2005 14:05

Ok je vais essayer ce soir.

Mais est-ce de la que vient mon probleme pendant l'installation du driver proprietaire, ou de la modification du xfree ?

XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-14sarge1 20050901212727 fjp@localhost.localdomain)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.8-16.0508-2 i686 [ELF]
Build Date: 02 September 2005

This version of XFree86 has been extensively modified by the Debian
Project, and is not supported by the XFree86 Project, Inc., in any
way. Bugs should be reported to the Debian Bug Tracking System; see

Ma carte est sur un port agp faut-il egalement faire une config?
Merci
CAPUCINE

Messages : 41

Mer 14 Déc, 2005 15:16

J'ai la même version d'X (debian Sarge "pure"), donc pas de soucis de ce sôté là. Je n'ai pas trop compris comment tu as installé le pilote propriétaire, mais en tous les cas avec la configuration que tu as donnée tu ne l'utilises pas, tu utilises le pilote fbdev (framebuffer).

Pour le port AGP tu as une tripotée de pilotes chargés (me demande bien pourquoi) ainsi que le pilote agpgart qui gère l'AGP (c'est celui que j'utilise également).

Essaie ce que je t'ai dit avec le pilote radeon, ça devrait marcher normalement !

Bon courage pour ce soir ;)

Usti
Nikoniste, Andesiste, Debianiste, ex-ATIste et Wi-Fiste en WPA avec un RaLink 2500 ;)
http://andesi.org/
ustilago

Messages : 211
Géo : Charente-Maritime

Mer 14 Déc, 2005 15:44

Je n'ai pas installé le pilote proprietaire, j'ai juste essayé mais l'installation n'a pas été au bout car je suis bloqué sur le choix du serveur X.
Est-ce que le pilote frame buffer est aussi "bon" (cote performances) que le pilote propriétaire? Lequel utilises tu?
Pour les pilotes du port agp mon systeme est une kla...

Merci A+
CAPUCINE

Messages : 41
Publier une réponse

Qui est en ligne ?

Utilisateur(s) parcourant actuellement ce forum : Aucun utilisateur inscrit

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Traduction réalisée par Maël Soucaze © 2010 phpBB.fr