Tout d'abord, je présente mes excuses pour ce long silence...
A ma décharge, on a eu la cousine de mon épouse et sa famille (3 garçons
) à la maison !
Athanor1 a écrit:Tu disposes des commandes, écris les quelque part (répertoire/fichier) et utilises-les à chaque fois que tu veux tenter quelque chose de particulier.
Ben comme je me suis fait un fichier pense-bête
Ordis_LINUX_-_Linux.kEd pour ne pas oublier certaines choses de base, je pense qu'il est tout à fait adapté !
Random a écrit:Je viens de regarder rapidement man cdrecord, mais 'pas vu de 800MB. Donc ce n'est pas possible alors ?
Dans
k3b, j'ai trouvé comment indiquer la taille duCD à graver !
'suffit de cliquer droit sur la barre indiquant la taille du CD à graver, en bas.
Athanor1 a écrit:Je ne sais pas si un CD de 800 Mo est ou non reconnus, mais cdrecord te le dira.
cdrecord avec les options -v et -dao.
cdrecord -v -dao dev=/dev/hd(lettre du device CheminNomdeFichier[/quote]Cependant, pour graver un CD de 800 MB en passant par k3b, ça n'a pas fonctionné et le rapport de bogue est :
- Code: Tout sélectionner
[...]
cdrecord
-----------------------
scsidev: '/dev/hdd'
devname: '/dev/hdd'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
/usr/bin/cdrecord: Warning: using inofficial libscg transport code version (warly-Mandrakelinux-scsi-linux-sg '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <warly@mandrakesoft.com>.
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'SAMSUNG '
Identifikation : 'CD-R/RW SW-252F '
Revision : 'R800'
Device seems to be: Generic mmc CD-RW.
Current: 0x0009
Profile: 0x000A
Profile: 0x0009 (current)
Profile: 0x0008
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R16 RAW/R96R
Drive buf size : 1279488 = 1249 KB
FIFO size : 4194304 = 4096 KB
/usr/bin/cdrecord: WARNING: Data may not fit on current disk.
/usr/bin/cdrecord: Notice: Use -overburn option to write more than the official disk capacity.
/usr/bin/cdrecord: Notice: Most CD-writers do overburning only on SAO or RAW mode.
Track 01: data 788 MB
Total size: 905 MB (89:42.57) = 403693 sectors
Lout start: 905 MB (89:44/43) = 403693 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 6
Is not unrestricted
Is not erasable
ATIP start of lead in: -12421 (97:16/29)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 71
Manufacturer: SHENZEN SG&GAST DIGITAL OPTICAL DISCS
Manufacturer is guessed because of the orange forum embargo.
The orange forum likes to get money for recent information.
The information for this media may not be correct.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: -43844
cdrecord comand:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/hdd speed=32 -tao -dummy driveropts=burnfree -eject -data -tsize=403691s -
mkisofs
-----------------------
403691
Warning: creating filesystem that does not conform to ISO-9660.
Warning: ISO-9660 filenames longer than 31 may cause buffer overflows in the OS.
Warning: creating filesystem that does not conform to ISO-9660.
Warning: ISO-9660 filenames longer than 31 may cause buffer overflows in the OS.
En passant par la console, ça n'a pas l'air mieux...
:
- Code: Tout sélectionner
[patrice@bru67-1-82-227-48-152 _Patrice_-_OSPREYs_01]$ cdrecord -v -dao -overburn dev=/dev/hdd *.*
Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <warly@mandrakesoft.com>.
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 1 = CD-ROM
scsidev: '/dev/hdd'
devname: '/dev/hdd'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version (warly-Mandrakelinux-scsi-linux-sg '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'SAMSUNG '
Identifikation : 'CD-R/RW SW-252F '
Revision : 'R800'
Device seems to be: Generic mmc CD-RW.
Current: 0x0009
Profile: 0x000A
Profile: 0x0009 (current)
Profile: 0x0008
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R16 RAW/R96R
Drive buf size : 1279488 = 1249 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 0 MB padsize: 492 KB
Track 02: data 45 MB
[...]
Track 23: data 0 MB padsize: 510 KB
Total size: 897 MB (88:55.64) = 400173 sectors
Lout start: 897 MB (88:57/48) = 400173 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 6
Is not unrestricted
Is not erasable
ATIP start of lead in: -12421 (97:16/29)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 71
Manufacturer: SHENZEN SG&GAST DIGITAL OPTICAL DISCS
Manufacturer is guessed because of the orange forum embargo.
The orange forum likes to get money for recent information.
The information for this media may not be correct.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: -40324
cdrecord: WARNING: Data may not fit on current disk.
cdrecord: Notice: Overburning active. Trying to write more than the official disk capacity.
Speed set to 5645 KB/s
Starting to write CD/DVD at speed 32.0 in real SAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is OFF.
Performing OPC...
Sending CUE sheet...
cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01: 0 of 0 MB written.
WARNING: padding up to secsize.
Track 01: writing 492 KB of pad data.
Track 01: Total bytes read/written: 110338/614400 (300 sectors).
Writing pregap for track 2 at 300
Starting new track at sector: 450
Track 02: 45 of 45 MB written (fifo 100%) [buf 99%] 18.3x.
WARNING: padding up to secsize.
Track 02: Total bytes read/written: 47636023/47636480 (23260 sectors).
Writing pregap for track 3 at 23710
[...]
Starting new track at sector: 399873
Track 23: 0 of 0 MB written.
WARNING: padding up to secsize.
Track 23: writing 510 KB of pad data.
Track 23: Total bytes read/written: 91626/614400 (300 sectors).
Writing time: 242.483s
Average write speed 22.6x.
Min drive buffer fill was 80%
Fixating...
Fixating time: 8.684s
cdrecord: fifo had 12754 puts and 12754 gets.
cdrecord: fifo was 0 times empty and 9193 times full, min fill was 51%.
Aurais-je oublié quelque chose ?? cdrao ?
Athanor1 a écrit:il est possible d'obtenir des résultats intéressants en ajoutant une option dans le fichier de configuration du bootloader.
Editer le fichier /boot/grub/menu.lst (sous root) et ajouter dans la ligne de kernel :
- Code: Tout sélectionner
hdx=ide-cd
Ouh là...
Balaize pour moi...
Déjà, j'utilise LILO pour le choix de boot de LINUX ou w$. C'est pas de ça dont il est entre autre question ?
