Rebonjour
je n'arrive toujours pas installer mon scanner opticpro4830p bien qu'ayant installé par adept: sane, xsane, libsane, sane, sane-utils, xsane-common le periphérique n'est pas reconnu avec xsane même en mode root
mon scanner est listé par site sane
http://www.sane-project.org/sane-backends-1.0.16.html et
http://www.sane-project.org/man/sane-plustek_pp.5.html
j'ai suivi les conseils de
http://www.lea-linux.org/cached/index/H … nerpp.html et
http://doc.ubuntu-fr.org/materiel/scann … _parallele
---------------------------------------------------------------------------------------------
j'ai edité /etc/sane.d/dll.conf
décommenter plustek_pp (= supprimer le # devant plustek_pp)
et ajouter # aux autres lignes
mon fichier dll.conf donne
# /etc/sane.d/dll.conf - Configuration file for the SANE dynamic backend loader
#
# On Debian systems, the dll backend will also look for pieces of configuration
# in the /etc/sane.d/dll.d directory -- packages providing backends should drop
# a config file similar to dll.conf in this directory.
#
# enable the next line if you want to allow access through the network:
#net
#abaton
#agfafocus
#apple
#avision
#artec
#artec_eplus48u
#as6e
#bh
#canon
#canon630u
#canon_pp
#coolscan
#coolscan2
#dc25
#dc210
#dc240
#dmc
#epson
#fujitsu
#gphoto2
#genesys
#gt68xx
#hp
#hpsj5s
#hp4200
#hp5400
#ibm
#leo
#lexmark
#ma1509
#matsushita
#microtek
#microtek2
#mustek
#mustek_pp
#mustek_usb
#mustek_usb2
#nec
#niash
#pie
#plustek
plustek_pp
#pnm
#qcam
#ricoh
#s9036
#sceptre
#sharp
#sm3600
#sm3840
#snapscan
#sp15c
#st400
#tamarack
#teco1
#teco2
#teco3
#test
#u12
#umax
#umax_pp
#umax1220u
#v4l
-----------------------------------------------------------------------------------------
par contre pour
editer /etc/sane.d/plustek_pp.conf
il est dit (s'agissant scanner lifetec) ajouter y la ligne scanner "LifeTec 9350" 0x378 cis1200
mais que dois je mettre pour mon scanner ?
http://www.sane-project.org/man/sane-plustek_pp.5.html
pour le port j'ai mis device parport0 mon imprimante sur port // fonctionne bien sur ce port ou est branché le scanner.
mon fichier plustek_pp.conf donne
# Plustek-PP SANE Backend configuration file
# For use with Plustek parallel-port scanners
#
#
# user either [direct] or [kernel] to access the scanner
# when using [kernel], device specifies the device-node, which is created
# by the kernel-module loader (applies only to Linux)
# when using [direct], device is used to set the parallel-port base address
# or a device-name suitable for libieee1284, i.e. parport0
#
#[direct]
#device 0x378
#
# example for accessing the scanner via libieee1284
#
[direct]
device parport0
#
# leave the default values as specified in /etc/modules.conf
#
option warmup -1
option lOffOnEnd -1
option lampOff -1
# model override switch, mostly for cosmetic changes, if the autodetection
# does not work or could not work correctly
#option mov 7
#
# example for accessing the scanner via the kernel module
#
#[kernel]
#device /dev/pt_drv
#
#option warmup -1
#option lOffOnEnd -1
#option lampOff -1
-----------------------------------------------------------------------------------------------------------
j'ai fait selon conseils de
http://doc.ubuntu-fr.org/materiel/scann … _parallele
dans un terminal
sudo adduser son_compte_utilisateur lp
on ferme sa session et on se reconnecte
dans un terminal
groups donne
son_compte_utilisateuradm lp dialout cdrom floppy audio dip video plugdev lpadmin scanner admin
son_compte_utilisateur@ubuntu:~$
scanimage --list-devices donne
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
son_compte_utilisateur@ubuntu:~$
-------------------------------------------------------------------------------------------
auriez vous des conseils ?
merci
